Puppet Maker

We were waiting to cross the street at a busy intersection when a maniacal laugh came from the center of the crowd.

It turned out to be coming from Salacious Crumb, the small monkey-lizard creature you may have seen hanging out with Jabba the Hut in Return of the Jedi.

Salacious Crumb puppet

Actually, it was a Salacious Crumb puppet, created by fellow Star Wars Celebration attendee Ian Martin.

Ian made the puppet from Latex and attached a sound board to the bottom, so he could make him laugh or shriek. I believe he said this was the first puppet he’s made. Impressive.

If you can’t see the short video I posted above of Salacious Crumb in action, you can find it on my Instagram.

Also, check out Ian’s YouTube channel for more on how he made the puppet.

 


Microblog Mondays: Write in your own space

DIY Armor: Tips from cosplay experts

“Making costumes is addictive. You never just do one costume. It destroys your life.”
501st Legion

501st-stormtroopers

I went to a couple of fascinating back-to-back maker panels at Star Wars Celebration. They shared tips that would be useful in all kinds of craft – even if you’re not into Star Wars.

The panels were given by two groups.

  • 501st Legion: make/wear Star Wars “dark side” costumes (Darth Vader, stormtroopers, etc.)
  • Mandalorian Mercs Costuming Club: make/wear armor-clad bounty hunter costumes (Boba Fett). Four members constructed armor for a panel audience volunteer in just 40 minutes (!)

Like Justice League Arizona (who I’ve mentioned before), members of these two groups build their own costumes, often make free appearances for charities and other good causes, and are passionate about what they do.

501st

Getting started

501st Legion:

Don’t do a complicated metal costume like Boba Fett for your first costume. Do a soft costume.

Mandalorian Mercs:

You can get everything you need to make your armor for under $50 – tools, Bondo, gloves, etc. But know what level of tools to buy and when to spend less. Don’t be afraid to spend a little money on good tools, if you’re able to.

image

Safety

Mandalorian Mercs:

    • Wear gloves. Hot glue will burn you and will not stop burning until it cools off.
    • The most dangerous thing is an X-ACTO knife. That’ll cut through you faster than a hot knife through butter.

mando-mercs-armor-c

Sizing for Costumes

Audience question: How do you adapt costume templates for people who wear larger sizes?

Mandalorian Mercs: Use optical illusion – black fabric, extra flanks, etc. Adapt templates to fit your body. People don’t all have the same proportions, especially women. Get up close with a friend, who can help you get your exact measurements. Armor must be molded to your body. I don’t think anyone else could put on my armor.

501st Legion:

It’s better to have slightly less accurate armor that’s proportionate to you. You don’t have to stick with on-screen measurements.

Mandalorian Mercs:

Make a duct tape dummy for a perfect cast of your body you can use to create a costume sized to fit.

    1. Put on a t-shirt that’s one size too small.
    2. Duct tape around yourself.
    3. Have friend cut it off down the back.

image

Materials and Tools

Audience question: Does costume material have to be the same as the original?

501st Legion: No. It comes down to the finish. If a piece is painted well, you can’t tell what it was made from.

Mandalorian Mercs:

  • A dremel set is one of the most important tools. It makes plastic look like metal. However, it is extremely messy. It goes so fast it can eat into your armor.
  • The best place to find expanded PVC board, a.k.a. Sintra is a sign shop. [I believe Sintra is what they used for the armor-making demo. –TCJ]
  • You can get Bondo at Walmart. It comes in large container that should last a long time. Do not glob Bondo on. Use rubber spatula to smooth on small bits.
  • Krylon paints dry quickly and last. Don’t mix them with Rustoleum, because it won’t cure. Some people prefer to airbrush.
  • Primer is like the Velcro to help your paint stick. It’ll last longer.

501st Legion:

Use rare earth magnets when working with metal that you can’t clamp down on. Just don’t accidentally glue your magnets to your armor!

image

Sourcing

Mandalorian Mercs:

Costume pieces may be incorporated from found items, seemingly random things like a battery cover from a palm pilot. We like go on what we call “scavenger hunts”. You’ll never look at the thrift store or dollar store the same way.

501st Legion:

It’s funny how our costume obsession has increased the price on random and ridiculous stuff on eBay! 3D printing can be a cost-effective alternative.

image

Final Thought

501st Legion:

Sometimes we get too obsessed with details and have to remind ourselves: “Just relax. We’re just plastic spacemen.”

Thank you to Star Wars Celebration for providing media passes.

7 Things that Only Happen at a Star Wars convention

image

A few of the things we witnessed at the Star Wars Celebration convention that I doubt happen anywhere else:

    • A panel on Star Wars vegetable carving — that was full to capacity.
    • The feeling you’re being followed, and then realizing that behind you is a full-size working R2D2 made out of LEGO.
    • An emcee, who, immediately after showing a movie trailer, asks “Do you want to see it again?” and an audience that shouts “YEAH!” and stays to watch a second time.

Star Wars squash
LEGO R2D2

  • A guy who cosplays as George Lucas.
  • A room full of non-Navajo speakers going to a screening of a movie in Navajo.
  • Carrie Fisher casually wandering out to a food court patio to give her dog some water.
  • A 3D movie experience that keeps getting disrupted by people walking in late and using light sabers as flashlights.

Star Wars opening crawl in the Navajo language
Carrie Fischer

Microblog Mondays

The Return of Southwest Maker Fest

It’s almost time for the second annual Southwest Maker Fest, a free celebration of creativity and collaboration, hacking and tinkering. Once again, there will be lots of workshops, interactive maker booths, and music.

paper-bag-scrapbook-supplies-ed

I’ll be presenting “Make Art Travel Journals Anywhere!” I’ve built on last year’s workshop to make it more hands-on.

southwest-maker-fest

Southwest Maker Fest will be held this Saturday, March 28 from noon to 8pm in downtown Mesa, Arizona. My workshop is at 12:30pm in the i.d.e.a. Museum HUB Classroom (150 W Pepper Place).

brownbag-journal-landscape3

I’m also relaunching my newsletter with the next issue coming out this week! If you haven’t signed up previously, get on the list!

Microblog Mondays

Fan Fest: Overview

Phoenix Comicon organizers could have been content to continue running a really solid convention every summer. With an army of 1600 volunteers and just 6 paid staff, they were already putting on one of the largest Comicons in the U.S. They could’ve just cruised.

fan-fest-2

Instead, they decided to level up and add a second annual event. In response to community feedback, Fan Fest was held last month at University of Phoenix Stadium in Glendale.

fan-fest-uofp-stadium-2

The 3-day Fan Fest had a more focused scope than the intimidatingly expansive schedule of the main Phoenix Comicon event, wrapping up each day by 7:30 pm or so instead of stretching to the wee hours. It still had multiple tracks, two Doctor Whos (Doctors Who?), activities for all ages, and an attendance of over 11,000. (So…slightly larger than the population of Sedona.)

Yes, there was a first year glitch here and there, but overall it was a great event.

Clearly, the force is strong with them.

fan-fest-artists-3

Comic book track

Ahead of the con, organizers polled the community about what kind of character they’d like to see created. Then, during the weekend, an entire track was devoted to bringing the character and story to life.

fan-fest-artists-2

For each step of the process – sketching, inking, coloring, etc. – a different panel of volunteer artists would build on what had been created before, brainstorming and incorporating audience feedback as they went. I sat in on the clothing session. Discussions centered on how to reflect the story and super powers of the character, Blaze, in the design of her costume with the artists sharing ideas and opinions, as well as busily sketching them out.

By the end of the weekend, there was a 4-page comic book(let) of Blaze’s origin story.

image

Costuming

I’ll introduce you to some of the fabulous cosplayers and other makers I met in a separate post. For now, here are some of the costuming related programming and activities I got a chance to check out.

fan-fest-cosplay-fashion

Cosplay fashion show – So many imaginative costumes! And some of the teens really got into character as they walked down the runway. It was great to see them embrace and embody something they’re into.

Costume-building competitions – Due to lack of participation, a few of these had to be cancelled. I chalk this up to first-year growing pains. I’m not sure people came expecting to participate as much as they had the opportunity to.

prop-demo

fan-fest-prop

EVA foam demo – Mike Syfritt demonstrated his techniques for working with sheets of EVA foam, laser-cutting and layering them to create cosplay weapons and other props. Also, he had a really impressive supply toolkit – with an entire drawer for glue.

fan-fest-makeup

fan-fest-makeup-2

Makeup – There was a special effects make-up competition with just 75 minutes to transform an audience volunteer using theatrical makeup. The make-up artists did a fantastic job!

fan-fest-uofp-stadium-3

Exhibition hall

There were around 300 exhibitors. A big section of the hall, “artists’ alley,” was devoted to comic book and other illustrators. There are several artists and makers I’m excited to tell you about, but again, that’s going into another post.

Beyond the exhibitors were the lines for photo ops with actors and other guests.

fan-fest-han

There were also some places to take your own photos. Phillip posed as Han Solo facing off against the bounty hunter Greedo in a replica of an infamous hive of scum and villainy.

fan-fest-lego

The Cactus Brick adult LEGOs users’ group was back with a LEGO city like the one they brought to Phoenix Comicon. They also had a table where you could make your own creation.

fan-fest-quidditch

Other highlights

Outside there were different activities like jousting matches, muggle quidditch, and bouncy houses/slides/etc. for kids.

fan-fest-pugs-1

PUGS

There was a team version of the Phoenix Ultimate Geek Smackdown (PUGS), which Phillip participated in.

Teams had to debate geeky topics like “who wore the bow tie best: Doctor Who or Bill Nye?” Moderator Jeff Moriarty assigned the sides to the teams as he saw fit, and they had to defend whichever was assigned to them.

fan-fest-pugs

For example, Phillip’s team had to argue why Catwoman was better with a whip than Indiana Jones. They put forth a valiant effort, but, really, Indy is hard to beat.

Preview of Phoenix Comicon

“We want Phoenix Comicon to be a place where you don’t just come see things, you come do things.”
–Phoenix Comicon 2015 Preview panel

IMG_9473

One of the last panels was about what to expect from Phoenix Comicon in May 2015.

The summer event will be held at the Phoenix Convention Center again. Memberships (tickets) are already on sale. There are 8 host hotels, and they will probably sell out early.

A few of the things that are in the works:

  • Possible Jedi training with a lightsaber group.
  • Youth activities, skits, and art room.
  • Science tracks that count towards continuing education credits for teachers.
  • More writing panels.
  • “Drinks with Authors” events.
  • More fantasy programming centered around Lord of the Rings, Game of Thrones, etc.
  • More nighttime events, including nightly parties at the host hotels. Some will be 21+ and some for all ages.

phxff

– More info –

image
Thank you to Phoenix Comicon for providing media passes!